PicoZord Web Config

D-Pad

Left Stick

Right Stick

Simulated output layout (4/6/8)

Main Buttons (layout: 6)

Digital Buttons

Analog Buttons

Analog Triggers

Info

Input/Output

Item	Current	Description
Input Mode		Input into the adapter Default is -
Output Mode		Output from the adapter Default is -
Automatic USB Output Mode	Disabled	Automatically change Output Mode based on USB Host detection. Supports: Windows, Switch 1, PS4, ogXbox. Will fall back to the selected Output Mode. Default is Disabled

Output mode shortcut

Button	Output Mode	Description

PS4

Item	Current	Description
PS4 Mode		Controller mode used when in OUTPUT_PS4 mode. Each mode has different compatibility and authentication requirements. Recommended: GAMEPAD for PS4 games, ARCADESTICK for some PS5 games. More details at the table below. Default is -
Use PS4 Keys	Disabled	Use uploaded key files extracted from a DualShock 4 controller. Used when in OUTPUT_PS4 mode. Enable to use the uploaded files. Disable to use USB Passthrough (requires a USB Host input port). Default is -

PS4 Mode details

MODE	PS4 game (on PS4/PS5 console)	PS5 game	Authentication
MODE	PS4 game (on PS4/PS5 console)	PS5 game	Key Files	USB with DualShock 4	USB with special device
GAMEPAD	✅	❌	✅	✅	✅
ARCADESTICK	✅	✅⚠️Supported only by a few games	❌	❌	✅

Analog

Item	Current	Description
Deadzone (%)		The inner deadzone is the radius around the stick center that is treated as neutral. Enter a percentage value; the same value is applied to both analog sticks if they are present. Default is -
N64 Analog Stick Max		Maximum value for N64 analog stick. The N64 controller does not report the stick's full range. Use this setting to fine-tune the reported range so the adapter outputs the full range. Default is -
GC Analog Stick Max		Maximum value for GC analog sticks. The GC controller does not report the stick's full range. Use this setting to fine-tune the reported range so the adapter outputs the full range. Default is -
GC Analog Trigger Min		Minimum value for GC analog triggers. The GC controller does not report the trigger's full range. Use this setting to fine-tune the reported range so the adapter outputs the full range. Default is -
GC Analog Trigger Max		Maximum value for GC analog triggers. The GC controller does not report the trigger's full range. Use this setting to fine-tune the reported range so the adapter outputs the full range. Default is -
WII Analog Stick Max		Maximum value for GC analog sticks. The WII controller does not report the stick's full range. Use this setting to fine-tune the reported range so the adapter outputs the full range. Default is 75
WII Analog Trigger Min		Minimum value for Wii analog triggers. The Wii controller does not report the trigger's full range. Use this setting to fine-tune the reported range so the adapter outputs the full range. Default is -
WII Analog Trigger Max		Maximum value for Wii analog triggers. The Wii controller does not report the trigger's full range. Use this setting to fine-tune the reported range so the adapter outputs the full range. Default is -

Analog trigger range
Set min to 0 and max to 255.
Press and release the triggers a few times and take note of the min and max value.
Then configure the adapter with those values.

Function Hotkeys

Function	Hotkey	Hold Time (seconds)	Input (hex)

Button Hotkeys

Input	Output	Exclusive	Clear	Move	Input (hex)	Output (hex)

Other

Item	Current	Description
SOCD Mode		How opposite directional inputs are handled when pressed simultaneously. OFF - No resolution. Both inputs remain active. NEUTRAL - Both released. Both inputs are deactivated and the output is neutral. SECOND - Second input wins. The most recently activated input takes priority. FIRST - First input wins. The input that was activated first remains active. See notes below. Default is -
DPAD as Buttons	Disabled	Map DPAD to buttons. Useful for dance mats. Applies only to OUTPUT_HID and OUTPUT_MISTER Default is -
NSO Special	Disabled	Enable "Nintendo Switch Online" controller special modes. Default is -

SOCD
xid, xinput, ps3 gcwiiu, and switchpro support SOCD OFF at the protocol level, but each game can handle it differently.
Other output modes do not support SOCD; when SOCD is OFF, the NEUTRAL rule will be used.
With the exception that on OUTPUT_HID and OUTPUT_MISTER it's possible to enable DPAD AS BUTTONS and combine it with SOCD OFF.

Button Remap

Enable Button Remap

Disabled

Enable digital button remap.
Remap is applied right after reading input, and will affect hotkeys too.
Analog buttons will not be remapped.
Default is -

Input	Output

Input/Output requires saving.
Any other setting can be tested in real-time with apply.

Upload Files

Private Key:

Serial:

Signature: